Fixing them might not be as difficult as you think… Often it is just the reflective backing that has become darkened, and it is that which needs replacing.
Continue reading Blackened LCD screen repair
I was watching How Telephone Phreaking Worked when at 3:01, I saw this large Gameboy display
As original working gameboys are so expensive, how much would it cost to make one from parts?
Well, it’s not that easy. Unfortunately there is no source for new LCD screens (source). They have to be taken from donor DMG-01 units.
Continue reading Gameboy – by parts
Following on from Making your own ArduinoBoy, here is a photographic guide…
Continue reading ArduinoBoy build
I have already touched upon this in GameBoy Flashers, however I want to make cheap GameBoy flash cartridges using commercially available items…
Continue reading Making your own GameBoy Flash cartridges
Following on from ArduinoBoys and others and Scaling PDF for PCB, here’s a step by step guide to making Trash80’s ArduinoBoy, on a PCB. For a photographic guide, see ArduinoBoy build.
Obviously, you don’t have to use a PCB and you could make the ArduinoBoy using stripboard/veroboard, ProtoShield, or even on a breadboard… see at the bottom for a suggested layouts.
BTW, I assume Trash80’s moniker is a nod to the Radio Shack TRS-80?
Continue reading Making your own ArduinoBoy
Following on from the long saga that is Chiptunes and the Battered GameBoy, here are some links to the internals of the original GameBoy.
Featured image taken from here
Continue reading DMG internals