Following on from Making your own ArduinoBoy, here is a photographic guide…
Continue reading ArduinoBoy build
I have already touched upon this in GameBoy Flashers, however I want to make cheap GameBoy flash cartridges using commercially available items…
Continue reading Making your own GameBoy Flash cartridges
I located my old GameBoy Color. However, the batteries had been left in it for over 15 years, were terribly corroded and had leaked, and of course, rather predictably, the GameBoy Color no longer worked.
Continue reading Battered GameBoy Color
After perusing eBay looking at Pokemon cartridges for the GameBoy, I realised that there are some, not so clever, clones out there… Now, they probably all play the same but nevertheless…
Continue reading Counterfeit GameBoy cartidges
Following on from ArduinoBoys and others and Scaling PDF for PCB, here’s a step by step guide to making Trash80’s ArduinoBoy, on a PCB. For a photographic guide, see ArduinoBoy build.
Obviously, you don’t have to use a PCB and you could make the ArduinoBoy using stripboard/veroboard, ProtoShield, or even on a breadboard… see at the bottom for a suggested layouts.
BTW, I assume Trash80’s moniker is a nod to the Radio Shack TRS-80?
Continue reading Making your own ArduinoBoy
Following on from the long saga that is Chiptunes and the Battered GameBoy, here are some links to the internals of the original GameBoy.
Featured image taken from here
Continue reading DMG internals
Following on from Chiptunes, this is an ArduinoBoy specific article. ArduinoBoy was developed by Trash80. It also covers ArduinoBoy derivatives, such as TeensyBoy, and others… This blog is continued in Making your own ArduinoBoy.
Continue reading ArduinoBoys and others